Appendix; Installing The Program - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

Appendix

Installing the Program

The program is installed to the Navigation Sys-
tem using the application disc.
This is not necessary if your dealer already
performed the installation.
When installing the program, you carry out the
following operations. When all the setup proce-
dures are completed, you can use the Navigation
System.
1
Insert the disc while the vehicle is
parked.
2
Select the language used for the Navi-
gation System.
3
Setting the clock.
1
Park your vehicle in a safe place.
Leave the engine on, and make sure that the
parking brake is applied.
2
Insert the Pioneer DVD Map disc to the
disc loading slot of the Navigation Sys-
tem.
When the upgraded program has been found,
installation of the program starts immediately.
• Once the installation of the program
starts, do not stop the engine of your vehi-
cle nor switch off the Navigation System
until the installation is completed and the
following Audio screen appears.
3
Press the NAVI/AV button to change the
navigation screen.
4
Touch "Yes/Oui".
When you start the navigation unit for the first
time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the Naviga-
tion System. If desired, you can select another
language as shown.
❒ To keep English, touch "No/Non". After
this, proceed to Step 7.
❒ When you want to select another lan-
guage, touch "Yes/Oui", and proceed to
the next step.
5
Select the language from the list.
Touch the language you want to use.
❒ The language selected here is reflected for
the Navigation functions (e.g., Destination
search, etc.) only.
➲ To Change the language ➞ Page 64
Installation of the program, in the language
you chose, begins.
105