Switching The 5.1Ch Setting; Other Functions; Setup Adjustments; Setting The Video Input - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

L+R (Front speakers) — R (Front right
speaker) — L (Front left speaker)

Switching the 5.1ch setting

When the navigation unit is combined with the
multi-channel processor system (sold sepa-
rately), you can use the multi-channel sound.
Enter the following setting when combining the
multi-channel processor system.
• DO NOT enter this setting before you con-
nect the multi-channel processor system.
(If this setting is entered, the RCA will out-
put maximum volume for the multi-chan-
nel processor system.) Pioneer is not
responsible for any damage to the speaker
equipment caused by ignoring this warn-
ing.
1
Touch the source icon and then touch
"SOURCE OFF" to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Turn the ACC OFF, and then turn it ON
again.
3
Press EQ button, and then without releas-
ing it press ANGLE (-) button.
4
Release ANGLE (-) button first, and then
release EQ button.
5
Touch "5.1ch" in the INITIAL menu.
If you touch "5.1ch", it will be turned "ON".
If you touch "5.1ch" again to turn "OFF" the
setting, "5.1ch" will disappear. If you want to
turn it "ON" again, you have to repeat the pro-
cedure from the Step1.
96

Other Functions

Setup adjustments

(1)
(1) Setup menu display
Shows the setup function names.
➲ How to display the SETUP menu ➞ Page 69

Setting the video input

You can switch the setting according to the con-
nected component.
• Select "VIDEO" to watch video of a connected
component as AV source.
• Select "M-DVD" to watch video of a connected
DVD player as S-DVD source.
1
Touch "AV INPUT" in the SETUP menu.
Each touch of the "AV INPUT" changes the
settings as follows:
• OFF — No video component is connected
• VIDEO — External video component
• M-DVD — DVD player connected with
RCA cable
When a DVD player is connected with an AV-
BUS cable, do not select "M-DVD" or else no
picture is displayed even if you select S-DVD.

Setting for rear view camera

The navigation unit features a function that auto-
matically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear cam-
era is installed on your vehicle. When the shift
lever is in REVERSE (R) position, the screen auto-
matically switches to a rear view camera. (For
more details, consult with your dealer.) You can
also use the camera as a rear view camera (Rear
View). In this case, you can see the image of the
rear view camera during normal driving. (The
navigation map screen can be displayed on the
right-hand side and the camera image can be
displayed on the left.) Please beware that in this