Appendix; Troubleshooting - Pioneer AVIC-EVO1 Operation Manual

Other functions
Restoring the default settings
CAUTION
Do not turn off the engine while restoring the settings.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
52
2 Touch [AV Source Settings].
3 Touch [Restore Settings].
A message confirming whether to initialise the settings appears.
4 Touch the item you want to initialise.
All Settings
Almost all settings or recorded content returns to the
default.
Audio Settings
p This setting is available when the source is turned off.
Theme Settings
Bluetooth Settings
5 Touch [Restore].
64

Appendix

Troubleshooting

If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
Common problems
A black screen is displayed, and operation is not possible
using the touch panel keys.
"Power OFF" mode is on.
— Press any button on this product to release the mode.
Problems with the AV screen
CD or DVD playback is not possible.
The disc is inserted upside down.
— Insert the disc with the label upward.
The disc is dirty.
— Clean the disc.
The disc is cracked or otherwise damaged.
— Insert a normal, round disc.
The files on the disc are in an irregular file format.
— Check the file format.
The disc format cannot be played back.
— Replace the disc.
The loaded disc is a type the DVD player cannot play.
— Check what type of disc it is.
The screen is covered by a caution message and the video
cannot be shown.
The handbrake lead is not connected or the handbrake is not
applied.
— Connect the handbrake lead correctly, and apply the
handbrake.
The handbrake interlock is activated.
— Park your vehicle in a safe place and apply the handbrake.
No video output from the connected equipment.
The "AUX Input" setting is incorrect.
— Correct the settings.
The audio or video skips.
This product is not firmly secured.
— Secure this product firmly.
No sounds are produced. The volume level will not rise.
Cables are not connected correctly.
— Connect the cables correctly.
The system is performing still, slow motion, or frame-by-
frame playback with DVD-Video.
— There is no sound during still, slow motion, or frame-by-
frame playback with DVD-Video.
The system is paused or performing fast reverse or forwards
during the disc playback.
— For the media other than music CD (CD-DA), there is no
sound on fast reverse or forwards.
The icon is displayed, and operation is impossible.
The operation is not compatible with the video configuration.
— The operation is not possible. (For example, the DVD
playing does not feature that angle, audio system, subtitle
language, etc.)
The picture stops (pauses) and this product cannot be
operated.
The reading of data is impossible during disc playback.
— Stop playback once, then restart.
The picture is stretched, with an incorrect aspect ratio.
The aspect setting is incorrect for the display.
— Select the appropriate setting for that image.
A parental lock message is displayed and DVD playback
is not possible.
The parental lock is on.
— Turn the parental lock off or change the level.
The parental lock for DVD playback cannot be cancelled.
The code number is incorrect.
— Input the correct code number.
The DVD video is not played back with the audio/subtitle
language specified in "DVD/DivX Setup".
The DVD does not support the language selected in "DVD/
DivX Setup".
— Playback in the selected language is not possible if the
language selected in "DVD/DivX Setup" is not recorded
on the disc.
The picture is extremely unclear/distorted and dark during
playback.
The disc features a signal to prohibit copying. (Some discs
may have this.)
— Since this product is compatible with the copy guard
analogue copy protect system, the picture may suffer from
horizontal stripes or other imperfections when a disc with
that kind of protection signal is viewed on some displays.
This is not a malfunction.