Initial Settings; Adjusting Initial Settings; Switching The Auxiliary Setting; Setting The Rear Output And Subwoofer Controller - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

4
Touch any of 1 — 8 to select the desired
level.
The parental lock level is set.
• LEVEL 8 — Playback of the entire disc is
possible (initial setting)
• LEVEL 7 — LEVEL 2 — Playback of discs
for children and non-adult oriented discs is
possible
• LEVEL 1 — Playback of discs for children
only is possible
❒ If you want to change the parental level,
enter the registered code number in the
Step 2.
❒ We recommend to keep a record of your
code number in case you forget it.
❒ The parental lock level is recorded on the
disc. You can confirm it by looking at the
disc package, included literature or on the
disc itself. With discs that do not feature a
recorded parental lock level, you cannot
use parental lock.
❒ With some discs, parental lock operates to
skip certain scenes only, after which nor-
mal playback resumes. For details, refer to
the disc's instructions.
❒ If you forget the registered code number,
touch "CLEAR" 10 times on the screen in
the Step 2. The registered code number is
canceled, letting you register a new one.

Initial Settings

Adjusting initial settings

(1)
Initial settings lets you perform initial set up of
different settings for navigation unit.
(1) Function display
Shows the function names.
94
1
Touch the source icon and then touch
"SOURCE OFF" to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Touch "A.MENU" and then touch
"INITIAL" to display the function names.
The function names are displayed and opera-
ble ones are selected.
When "A.MENU" is not displayed, you can
display it by touching the screen.
To return to the previous display, touch
"BACK".
To return to the display of each source, touch
"ESC".

Switching the auxiliary setting

It is possible to use auxiliary equipment with nav-
igation unit. Activate the auxiliary setting when
using auxiliary equipment connected to naviga-
tion unit.
1
Touch "AUX" in the INITIAL menu.
Touching "AUX" switches between "ON" and
"OFF".
Setting the rear output and sub-
woofer controller
This unit's rear output (rear speaker leads output
and RCA rear output) can be used for full-range
speaker (REAR SP FULL) or subwoofer (REAR
SP SUB. W) connection. If you switch the rear
output setting to the REAR SP SUB. W, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, navigation unit is set for rear full-range
speaker connection (REAR SP FULL). When
rear output is connected to full range speakers
(when REAR SP FULL is selected), you can con-
nect the RCA subwoofer output to a subwoofer.
In this case, you can select whether to use the
subwoofer controller's (low pass filter, phase)
built-in PREOUT SUB. W or the auxiliary
PREOUT FULL.