Cautions Relating To Auto Reroute In Memory Navi Mode; Traffic Icon During The Momory Navi Mode; Operation Outside The Memorized Area - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

"Delete route" to delete the current route, then
reset the destination.)
• In some cases, you may not be able to use map
display mode during DVD navi mode. If the
map display mode is not changed during
memory navi mode, when the disc is set next
time, the display will return to the map display
mode used during the DVD navi mode.
• In memory navi mode, map scale data that
cannot be read in the memory cannot be dis-
played. Accordingly, the edge of the map will
appear cut off along the point it was not read
into memory. This simply indicates the edge of
the map data, and is not a malfunction.
• If you keep driving or scrolling the map to a
point where the map can no longer be dis-
played, the scale automatically switches to a
range possible to display. If you would like to
continue driving or scrolling the map at the
same scale, set the map disc in the navigation
unit.
• You cannot reroute to avoid traffic congestion
or closure.
• If you continue to drive outside the route for a
while, you may not be able to perform map
matching.
• If you deviate from the route during memory
navi mode, the route has been set will be
rerouted, but only to return you to the original
route calculated within the memorized area.
• Although an enlarged map of the intersection
will be displayed, no special freeway illustra-
tion (illustration of freeway intersections) will
be displayed.
• Voice recognition functions face some limita-
tions compared to DVD navi mode.
➲ "Voice Commands" ➞ Page 102
• In memory navi mode, the voice function to
inform you of traffic congestion or closure
forming on the route does not function.
Cautions relating to auto reroute
in memory navi mode
Auto rerouting in memory navi mode is designed
to return you to your original route wherever pos-
sible.
In memory navi mode, persistently deviating from
the route may result in one of the following:
• A clearly circuitous route
• Leaving a toll road and returning to the toll
road from where you left it.
In the above case, if the set route seems unsuita-
ble, insert the map disc that records your current
position. Setting the map disc to navigation auto-
matically resets the route from your current loca-
tion to your destination.
TRAFFIC icon during the
momory navi mode
• XM NavTraffic-related data for a "Zone" (e.g.,
Zone 1 contain ID, OR, WA) only can be memo-
rized. Therefore, if
screen when crossing a zone border, you will
need to insert the disc to use the XM NavTraf-
fic function. Touching
check the locations of the traffic information
along the route. However, you cannot perform
rerouting.
Operation outside the memo-
rized area
When the vehicle leaves the memorized area, the
functions will be limited.
• The auto reroute function does not work.
• You can only display a larger scale map. The
map display will automatically change to a 25-
mi (or 50-mi) scale.
• The map matching function will not be availa-
ble. Therefore, the position of your vehicle may
be misaligned.
• Only the navigation guidance when arriving to
your destination will be available; no other
guidance is possible (this includes no display
of direction arrows).
To cancel these limitations, reset the map disc to
the Navigation System.
appears on the
allows you to
109