Checking The Navigation Status; Checking Sensor Learning Status And Driving Status - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

The background image starts changing. After
a short while, the new background image
appears.
8
Touch "Done".
On this screen, you can select the following
items:
Select another Picture :
This is selected when you want to change to
another picture. Return to Step 5.
Change to another background :
Select if you want to successively change the
Audio Operating screen backgrounds or the
Navigation backgrounds. Return to step 3.
❒ When changing a picture starts, do not cut
off the vehicle engine until the message
informing the completion of changing a
picture is indicated.
❒ When the Navigation System is reset, or
the language setting is changed, the back-
ground picture may change back to the
original picture. (There is also a possibility
that the system will revert to the original
picture for some other reason). If this hap-
pens, set the background picture again.

Checking the Navigation Status

The navigation status, including the driving sta-
tus of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable con-
nection status can be checked.
Checking sensor learning status
and driving status
1
Touch "Settings" in the Main menu, then
touch "Hardware Info".
2
Touch "3D Calibration".
The 3D Calibration screen appears.
60
(6) (7) (5)
(1) Distance
Driving distance is indicated.
(2) Speed Pulse
Total number of speed pulses is indicated.
(3) Learning Status
Current driving mode is indicated.
(4) Degree of learning
Sensor learning situations of distance
(Distance), right turn (Right Turn), left turn
(Left Turn), and 3D detection (3D Detection)
are indicated by the length of bars.
❒ When tires have been changed or chains fit-
ted, turning on the Speed Pulse allows the
system detects the fact that the tire diameter
has changed, and automatically replaces the
value for calculating distance.
❒ If the ND-PG1 is connected, the distance cal-
culation value cannot be replaced automati-
cally.
(5) Speed
Speed detected by this unit is indicated. (This
indication may be different from the actual
speed of your vehicle, so please do not use
this instead of the speedometer of your vehi-
cle.)
(6) Acceleration or deceleration/Rota-
tional speed
Acceleration or deceleration velocity of your
vehicle is indicated. Also, rotational speed
when your vehicle turns to left or right is
shown.
(7) Inclination
Degree of slope of the street is indicated.
To clear values...
If you want to delete the learned results stored in
"Distance", "Speed Pulse" or "Learning Sta-
tus", touch the relevant result, then touch
"Clear".
(1)
(2)
(3)
(4)