Changing The Scale Of The Map - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

(9) VOICE icon
Touch to change to voice recognition mode.
❒ This is displayed only when the microphone
for voice recognition is connected.
➲ The voice operation of the Navigation System
➞ Chapter 9
(10) TRAFFIC icon
This appears when an XM tuner (e.g., GE-
P10XMT, sold separately) is connected, and traf-
fic information is received.
(11) Current time
(12) Estimated time of arrival (or travel time
to your destination)*
The display changes with each touch.
The estimated time of arrival is automatically cal-
culated from the Average Speed set and the
actual average speed.
➲ How to set average speed ➞ Page 64
(13) Tracking mark
The tracking mark shows the route your vehicle
has traveled.
➲ Select the tracking setting ➞ Page 66
(14) Map of your surroundings (Side map)
Touching on the map briefly shows the shortcut
menu, while touching longer changes the map to
Scroll mode.
➲ Moving the map to the location you want to
see ➞ Page 33
(15) Distance to an intersection*
Displayed on the enlarged intersection map. The
green bar gets shorter as your vehicle
approaches an intersection.
(16) Next direction of travel*
When you approach an intersection, it appears
green. The screen displays the distance to the
next guidance point, and the next guidance point
after that.
(17) Area to Avoid*
➲ About detour area ➞ Page 49
(18) Direction line
The direction towards the location set in (4) is
indicated with a straight line.
(19) Memory navi indicator
➲ About memory navi indicator ➞ Page 108
32
(20) Lane information
Lane information is displayed the first time voice
guidance is used. When the guidance screen is
displayed near an interchange or exit, the lane
information disappear.
(21) Freeway signs
These show the road number and give directional
information.
(22) Freeway exit information
Displays the freeway exit.
❒ Information with the mark (*) appears only
when the route is set.
❒ Depending on the conditions and settings,
some items may not be displayed.

Changing the scale of the map

Touching the "Zoom in/Zoom out" key displayed
on the upper right of the screen displays the
scale gauge and "Direct scale" key. Directly
touching the "Direct scale" key changes the map
to the selected scale. Touching
the scale gauge allows you to specify the scale in
greater detail within a range of 25 yards - 1000
miles (25 meters - 2000 kilometers).
❒ In memory navi mode and/or when traversing
an area not stored on the disc, selection of the
scales is limited.
❒ The icon of a registered location and the traf-
fic information icons are displayed when the
map scale is 10 miles (20 km) or lower.
❒ POI icons and the line for traffic congestion
and traffic flow are displayed when the map
scale is 0.75 mile (1 km) or lower.
❒ The Direct scale key may not appear depend-
ing on the map display mode.
or above
Direct scale key