Removing A Bezel Blank - HP SignagePlayer mp8200 Hardware Reference Manual
Hardware reference guide - hp signageplayer mp8200 and hp signageplayer mp8200s
Hide thumbs
Also See for SignagePlayer mp8200:
- Quickspecs (27 pages) ,
- Getting started manual (64 pages)
Table of Contents
Advertisement
Removing a Bezel Blank
On some models, there is a bezel blank covering the internal drive bay that needs to be removed
before installing a drive. To remove a bezel blank:
1.
Remove the access panel and front bezel.
2.
To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place towards
the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-5
Removing a Bezel Blank
Removing a Bezel Blank
13
Advertisement
Table of Contents
