Chapter 1
Cisco SRST SNMP MIB Support
csrstSipEndpointIpAddrType.2 = ipv4(1)
csrstSipEndpointIpAddrType.3 = ipv4(1)
csrstSipEndpointIpAddress.0 = ipv4:1.4.196.41:26057
csrstSipEndpointIpAddress.1 = ipv4:1.4.196.1:5060
csrstSipEndpointIpAddress.2 = ipv4:1.4.196.41:26057
csrstSipEndpointIpAddress.3 = ipv4:1.4.196.1:5060
csrstSipEndpointDN.0 = 5001
csrstSipEndpointDN.1 = 5001
csrstSipEndpointDN.2 = 5002
csrstSipEndpointDN.3 = 5002
Receiving Notifications/Traps
Notifications and traps are asynchronously generated by SRST to pass information about certain device
status changes.
notification or trap.
Table 1-4
SRST Notifications/Traps
Notification/Trap
Reason
csrstStateChange
SRST system state change up
csrstStateChange
SRST system state change down
csrstStateChange
SIP SRST system state change up
csrstStateChange
SIP SRST system state change down
csrstFailNotif
Skinny listening socket setup error
csrstFailNotif
Maximum number of allowed sockets has been exceeded
csrstFailNotif
Skinny server initialization failed
Sockets initialization failed
csrstFailNotif
Skinny server initialization failed
Not enough memory
csrstFailNotif
Not enough memory to create Registrar Control Block (rcb) for SIP
Voice Register DNS
csrstFailNotif
Not enough memory to create Call Control Block (ccb) from SIP
registrar outgoing
There is no reason string or severity sent with the following traps:
•
•
•
The following list contains all the CISCO-SRST-MIB traps.
•
*Mar
OL-7959-01
Table 1-4
lists the SRST notifications/traps and additional information regarding each
csrstSipPhoneUnRegThresholdExceed
csrstSipPhoneRegFailed
csrstConferenceFailed
csrstStatusChange - SRST status change trap (Up)
7 20:56:23.207: SNMP: V1 Trap, ent ciscoMgmt.441, addr 1.4.196.10, gentrap
Severity
Minor
Minor
Minor
Minor
Minor (when system is
running)
Minor (when system is
running)
Major (at initialization)
Major (at initialization)
Minor
Minor
Cisco SRST SNMP MIB Release 3.4 Guide
Configuration
1-25
Need help?
Do you have a question about the SRST - 881 EN Security Router Wireless and is the answer not in the manual?