Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual page 74

Configuring LEAP
• Saved user credentials—These are user credentials that are entered as part of the LEAP
configuration. The user is not prompted for credentials during authentication unless the saved
credentials fail or have expired. New credentials that the user enters after successful authentication
are saved automatically in the configuration. The user does not have to return to the configuration
screen to change the old saved credentials.
You can configure LEAP network credentials settings from the Network Credentials tab (see
Figure 3-9
Table 3-4
Table 3-4
LEAP Network Credentials
Settings
Use Windows username and
password
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
3-20
Network Credentials Tab in LEAP Properties Window
lists and describes LEAP network credentials settings.
LEAP Network Credentials Settings
Description
Click this radio button to use the Windows username and password as
the LEAP username and password for network authentication.
Default: On
Chapter 3 Configuring EAP Types
Figure 3-9).
OL-16534-01