Disabling Logging And Flushing Internal Buffers - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Chapter 4 Performing Administrative Tasks
Syntax Description category_mask
log_level
If you must shut down the device on which logging was running before logging finishes, logging resumes
Note
after reboot. When logging is started either automatically or manually, however, the logs are cleared.

Disabling Logging and Flushing Internal Buffers

After you have collected the information that you need, the following command stops logging and
flushes all internal buffers:
•
•
•
You must enter this command before you can analyze the .etl file.
Note
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Bitmask of categories of logging to be turned on. Valid values are as
follows:
•
•
•
•
The default value is 0.
Level of logging to be turned on. Valid values are as follows:
•
•
•
•
•
•
The default value is 0.
For EAP-FAST
wevtutil sl Cisco-EAP-FAST/Debug /e:false
For PEAP-GTC
wevtutil sl Cisco-EAP-PEAP/Debug /e:false
For LEAP
wevtutil sl Cisco-EAP-LEAP/Debug /e:false
0—logs all categories.
1—logs all messages not falling into the next two categories.
2—logs the flow of function entry and exit points with return code only
on Verbose log level.
4—logs packet dumps only on Verbose log level.
0—all log levels.
1—critical.
2—error.
3—warning.
4—informational.
5—verbose.
Logging for EAP Modules
4-27