Upgrading The Client Adapter Software - Cisco CB21AG Install Wizard

•
If you are prompted to restart your computer, click Yes. The installation is complete.
Step 29

Upgrading the Client Adapter Software

Follow these steps to upgrade your CB21AG or PI21AG client adapter software to release 2.5 using the
settings that were selected during the last installation.
If you want to upgrade your client adapter software using new installation settings, you must uninstall
Note
the previous installation [see the instructions in
LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide] and then follow the
instructions in the
Step 1 Make sure the client adapter is inserted into your computer.
Note
Use your computer's web browser to access the following URL:
Step 2
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Click Option #2: Aironet Wireless Software Display Tables.
Step 3
Note
Click Cisco Aironet Wireless LAN Client Adapters.
Step 4
Under Aironet Client Adapter Installation Wizard (For Windows), click 802.11a/b/g (CB21AG,
Step 5
PI21AG).
Click the Win-Client-802.11a-b-g-Ins-Wizard-v25.exe file.
Step 6
OL-8008-01
Windows XP
Double-click My Computer, Control Panel, and Network Connections.
a.
Right-click Wireless Network Connection x (where x represents the number of the
b.
connection).
Click Properties.
c.
In the This Connection Uses the Following Items field, click Internet Protocol (TCP/IP) and
d.
Properties.
Choose Use the following IP address and enter the IP address, subnet mask, and default
e.
gateway address of your computer (which can be obtained from your system administrator).
Click OK to close each open window.
f.
"Installing the Client Adapter Software" section on page 8
If your client adapter is not inserted, the installation continues, but the driver installation is
incomplete. You must manually upgrade the driver later using the Update Device Driver Wizard.
See Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and
PI21AG) Installation and Configuration Guide (OL-4211-04) for instructions.
If you prefer to use an automated tool, you can download software from the Software Selector
tool instead of the display tables. To do so, click Option #1: Aironet Wireless Software
Selector, follow the instructions on the window, and go to
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 2.5
Installing or Upgrading Client Adapter Software
Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless
Step 7.
to install the new software.
19