Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual page 82

Configuring PEAP-GTC
The user can configure PEAP-GTC user credentials from the User Credentials tab (see
Figure 3-12
Table 3-2
Table 3-6
User Credentials
Use one-time password
Use Windows username and
password
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
3-28
User Credentials Tab in PEAP-GTC Properties Window
lists and describes options for PEAP-GTC user credentials.
PEAP-GTC User Credentials Options
Description
Click this radio button to use a one-time password (OTP). In this
mode, credentials are never cached. Each time the server asks for
credentials, the user is prompted to supply credentials.
For more information about OTP, see the
and Token Mode with OTP" section on page
Default: Off
Click this radio button to use the Windows username and password as
the PEAP-GTC username and password for network authentication.
This mode only affects single sign-on authentication when the login
screen has one set of credentials instead of two sets of credentials,
which is the case for the Prompt automatically for username and
password option.
Default: On
Chapter 3 Configuring EAP Types
Figure 3-12).
"Understanding PIN Mode
3-12.
OL-16534-01