Table of Contents
Advertisement
7
Positioning drive Efka DC1550/DA321G
GB
DA321G control contains all necessary operating elements to switch
the functions over and to set the parameters. The operation is
possible without the control panel, it is not possible only to program
the sewing.
It is possible to connect the control panel V810 and V820, which are
available as an attachment. It is possible to program the sewing by the
control panel V820.
A detailed description of the control is included in the operating
manual of the motor manufacturer of Efka DC1500 – DA321G drive
(see also www.efka.net).
35
Advertisement
Table of Contents
