Table of Contents
Advertisement
LED
Function
8 and 9
Display for empty bobbin with machines equipped with residual thread monitor
(left/right bobbin).
10
LED display "power on"
Example of
Through the arresting of the pin 11 under the key 1 it is possible to transfer the key 1
function
arresting pins:
to key 7:
e.g. 11
- select the function (e. g. 1 = manual backtacking)
- turn the pin 11 under the key 1 by 90° clockwise (the groove is vertical)
The manual backtacking function can be called out by the key 1 and 7 now.
30
Warning!
Before key (7) can be programmed with a new function, the former
setting must be deactivated.
Advertisement
Table of Contents
