6.17.2 Switching on/off material guide
32
1
3
2
Switch on
–
Put the guide (1) in a working position by pushing the lever (2)
upwards or by pulling the guide body (3) downwards.
Switch off
–
Shift the ball (4) upwards and to the left. The guide element (5) lifts
in a setting position. When returning the guide element (5) in the
working position, proceed in a reverse order.
–
Or push the lever (6) downwards and the spring will turn the whole
guide in the setting position. It is at the user's discretion, which of
the material guide switch on/off options described will be chosen.
6
4
5