Setting The Stitch Length - DURKOPP ADLER 888 Instruction Manual

6.13 Setting the stitch length

ECO and CLASSIC Machines with electro-magnetic control
1
2
3
–
Turn the button (1) so that the number (2) indicating the required
stitch length in mm corresponds to the mark (3).
CLASSIC machines with pneumatic control
3
The special sewing machine 888 is equipped with two setting wheels.
Thus, two different stitch lengths can be sewn, that are activated by
actuating a key during the sewing process.
The two stitch lengths are set with the setting wheels (1) and (4) on the
machine arm.
–
Set the bigger stitch length with the upper setting wheel (1). Turn
the setting wheel (1) so that the number (2) indicating the required
stitch length in mm is opposite the mark (3).
–
Set the smaller stitch length with the lower setting wheel (4). Turn
the setting wheel (4) so that the number (2) indicating the required
stitch length in mm is opposite the mark (3).
–
The stitch length are the same for both, forward and backward
sewing.
CAUTION Danger of breakage!
The stitch length set with the lower setting wheel (4) must not exceed
the stitch length set with the upper setting wheel (1).
Hint
In order to facilitate the setting of stitch lengths, the stitch length that
remains unchanged should be activated with key (4) (see
chapter 6.16.2).
1
GB
2
4
25