Changing User Code Options; Access Code Label Options - DSC PC4020 - V3.3 Manual

Select (1) for
User Name Search
Press [1] or [
3. The first letter of the access code name using the corresponding
number key. For example, for John, enter the letter "J" by pressing
the [4] key once.
4. The keypad will display the first available name starting with the
selected letter. Use the right arrow (>) key to scroll through
subsequent names.
5. Once the appropriate user name is displayed, press [
programming.
Once the code has been selected, the Program Code menu will be shown.
Reprogram the access code, code label or partition access using the steps
outlined in Section 2.1 "Program a New Code".

2.3 Changing User Code Options

User code options determine which system features the code will be able
to access. Table 2-1 shows all of the available access code options. The
table also indicates which options are enabled by default for each type of
code.
To change the user options for a code from its default settings, perform
the following:
1. Enter [
2. Locate the code using one of the code searching methods (see Section
2.2). Press [
3. Use the right arrow (>) key to scroll to the following display:
Select (5) < >
Edit User Opt's
Press [5] or [
4. Use the arrow (< >) keys to scroll through each option. Press [
turn each option on (Y) or off (N).
5. When the desired options have been programmed, press [#].

2.4 Access Code Label Options

In Section 2.1, you learned how to program the access code label ("Program
User Name"). There are other options available when programming labels.
When programming the label, press the [
the arrow (< >) keys to scroll through each option. Press the [
The available options are:
• • • • • Clear Display: Clear Display: Selecting this option will clear the entire code label. Clear Display: Clear Display: Clear Display:
• • • • • Clear to End: Clear to End: This will clear the display from the character where Clear to End: Clear to End: Clear to End:
the cursor was located to the end of the display.
• • • • • Change Case Change Case Change Case
Change Case: This will toggle the letter entry between uppercase Change Case
and lowercase letters.
14
*
].
* ][5] followed by a Master code.
* ] to select.
* ].
* ] key for the options menu. Use
*
] to continue
* ] to
* ] key to select.