Section 2: Access Codes; Programming A New Access Code - DSC PC4020 - V3.3 Manual

Section 2: Access Codes

Access codes are used to arm and disarm the system as well as to access
system functions. There are many different codes available on the system.
The Grand System Master Code Grand System Master Code Grand System Master Code Grand System Master Code will be able to perform all system Grand System Master Code
functions. This includes zone bypassing, activating outputs enabling user
options and programming access codes. The Grand System Master Code
is access code 0001. Normally, only your installer can change this code.
Please ask your installer if you wish to be able to alter this code.
The following sections explain how to program new codes and modify
existing codes. All access code options will also be described.

2.1 Programming A New Access Code

This section describes the basic aspects to programming an access code:
• How to select a new access code for programming
• How to program the 4- or 6-digit code
• How to program the user's name to identify the code
• How to select the partitions the code will be active on
To select a new access code for programming, perform the following steps:
1. Enter [
2. The display will read:
Select (0) < >
User No. Search
Press [0] or [
3. The display will read:
Sel. Code (0001) < >
User 1
User 1 (Access Code 0001) is the System Master Code. Your installer
may already have programmed this code. Use the right arrow (>)
key to scroll to the code you wish to program (for example, access
code 0002). Press [
4. The display will read:
Select (0) < >
Program Code
This is the Pr Pr Pr Pr Program Code menu
though each display in the Program Code menu. Each display
pertains to a different aspect of access code programming, including
the three listed below. To select any menu item for programming,
press [
*
][5] followed by a Master Code.
*
].
* ] to select the code.
ogram Code menu ogram Code menu ogram Code menu. Use the right arrow (>) key to scroll ogram Code menu
* ].
11