Table of Contents
Advertisement
PROGRAMMING ADDITIONAL ACCESS CODES USING A SYSTEM
MASTER CODE OR A SUPERVISORY CODE
1 Press [ ] then [5] to enter the User Programming Commands; the
keypad will display the message "Enter Your Access Code". Any System
Master Code or Program Code may be entered.
• If the Grand Master Code is entered, System Master Codes and
regular access codes for any partition will be able to be programmed.
• If a System Master Code is entered, regular access codes for any
partition will be able to be programmed. A System Master Code can
also create Supervisory and Duress Codes.
• If a Supervisory Code is entered, only access codes belonging to the
partition to which the Supervisory Code is assigned may be changed.
When a valid access code is entered, the keypad will display the number
of available access codes on the first line of the screen.
2 The keypad will display the message "Sel Code (xxx) < >". "(xxx)"
represents the number of the access code that has been selected for
programming and the access code name on the second line. Use the [<]
[>] keys to scroll through the list of access codes, or enter the code
number 001 to 128. When the desired access code number is displayed,
press the [ ] key to program the code.
3 When an access code is selected for editing by pressing the [ ] key, a
menu for editing access codes will be displayed. Select one of the menu
items by entering a number on the keypad.
[0] Program Code - When [0] is pressed, the keypad will display the
message "Enter Digits" and the presently-programmed access code.
Enter the new 4 digit or 6 digit access code. Do not press [ ] or [#]
while entering the access code. If you do not wish to change the
code, press [#] key.
[1] Erase Code - If an access code is no longer needed, this selection
will erase the code, but not the user's name.
[2] Edit Access Code Name - When a PC4400 RS232 module is enrolled
on the system, the name of the code which is used to arm and disarm
will be printed out. Also, the access code name helps keep track of the
code when programming codes. Move the cursor to left or right by
pressing the [<][>] keys. The letters of the alphabet have been divided
up among the 1 to 9 number keys on the keypad as below:
[1] = A, B, C, 1
[4] = J, K, L, 4
[7] = S, T, U, 7
[0] = Space
[2] = D, E, F, 2
[3] = G, H, I, 3
[5] = M, N, O, 5
[6] = P, Q, R, 6
[8] = V, W, X, 8
[9] = Y, Z, 9, 0
15
Hide quick links:
Advertisement
Table of Contents
