Quick Arm [ ]+[0]; Quick Exit [ ]+[0] When Armed; Keypad Lockout; Fire Safety In The Home - DSC PC 4010 Manual

Hide thumbs Also See for PC 4010:
Table of Contents

Advertisement

QUICK ARM
[ ]+[0]
Entering [ ] [0] is accepted as a valid arming code when the "Quick Arm"
feature is activated. This command is often used when individuals are required
to arm the system but not disarm it. This could be used with home visitors in the
case of a residential alarm or junior employees and maintenance staff in the
case of a commercial alarm. See instructions in the "[ ] [6] Users Programming
Commands" section for activating the "Quick Arm" feature. The One-Time Use
Code users should not use this feature, because the One-Time Use Code will
only be erased when it is used to arm the system.
QUICK EXIT
[ ]+[0] WHEN ARMED
Entering [ ] [0] when the system is fully armed will allow the user 2 minutes
to exit the premises through any delay zone without altering the status of the
system if the "Quick Exit" feature is enabled. After [ ] [0] is entered into an
armed system, one and only one delay loop may be tripped. Any additional
activity on any other active loop will cause that loop to begin its alarm
sequence. Quick exit activation will be logged onto the event buffer.

Keypad Lockout

If this feature is enabled on a partition and a programmable number of incorrect
access codes are entered, the message "Keypad Lockout Is Active..." will be
displayed on all partition keypads. The keypad will respond with an error tone to
all further keypresses for a programmable amount of time.

Fire Safety in the Home

Most fires occur in the home and to minimize this danger it is recommended
that a household fire safety audit be conducted and a family escape plan be
developed.

Household Fire Safety Audit

1. Are all electrical appliances and outlets in a safe condition e.g. frayed
cords, over-loaded lighting circuits? If you are uncertain about the
condition of your electrical appliances or household service, have a
professional evaluation.
2. Are all flammable liquids stored safely in closed containers in a well
ventilated cool area? Cleaning with flammable liquids should be avoided.
3. Are fire hazardous materials (matches) well out of reach of children?
4. Are furnaces and wood burning appliances properly installed, clean and
in good working order? Have a professional evaluation.
25

Advertisement

Table of Contents
loading

Table of Contents