Rdp Options; Organizing Your System - Dell PowerEdge 180AS User Manual

5 Enable/disable the Launch in command window check box. When
enabled, the user-specified VNC application will be launched from within
an OS command window.
6 Click OK.

RDP Options

The software supports user-defined RDP viewers via the properties page. In
the RDP tab you can search for a user-specific RDP application and you may
include its command-line arguments. A selection of macros is available for
placement in the command-line; this may be useful for automatic
replacement of variables such as IP address, port number, user name, and
password. For RDP commands that do not provide their own GUI, such as
those for standard Windows, Linux, and UNIX, you may have the RDP
application launch from within an OS command window.
To change RDP options:
1 Explorer menu. The Options dialog box appears.
2 Click the RDP tab.
3 In the Application to Launch field, enter the directory path and name or
click the Browse button to locate the path and name.
4 Enter command-line arguments in the box below the path and name.
- or -
To insert a predefined macro at the cursor location in the command-line,
click the Insert Macro list box and select a macro from the drop-down
menu. The RCS software will automatically replace these variables when
the application runs.
5 Enable/disable the Launch in command window check box. When
enabled, the user-specified RDP application will be launched from within
an OS command window.
6 Click OK.

Organizing Your System

The Sites and Folders view tabs in the RCS software allow you to organize
and manage your Remote Console Switches and servers by custom groups.
Site organization is based on where your servers are located and refers to the
38
Basic Software Operation