Dell PowerEdge 180AS User Manual page 30

Figure 3-6. Select Remote Console Switches to Add Dialog Box
6 Repeat step 5 for all Remote Console Switches you wish to add. Click Next
to continue.
7 The Adding Remote Console Switches progress bar appears while the new
switches are being added. Once all of the selected switches have been
added to the local database, the Discover Wizard Completed page
appears. Click Finish to exit the Wizard and return to the main window.
Your new switches should now be in the Unit Selector pane.
8 If one or more switches could not be added to the local database for any
reason (including if you clicked Stop during the add process), the Discover
Wizard Not All Remote Console Switches Added page appears. This page
will list all of the switches that you selected and the status for each. The
status will indicate if a Remote Console Switch was added to the local
database and if not, why the process failed. Click Done when you are
finished reviewing the list.
NOTE:
If a Remote Console Switch already exists in the database with the same IP
address as a discovered unit, then the discovered switch will be ignored and will
not display on the next Wizard page.
24
Basic Software Operation