Dell PowerEdge 180AS User Manual page 49

1 Select the unit(s) you wish to delete from the Unit Selector pane.
2 Select Edit - Delete.
-or-
Press the <Del> key on your keyboard. A dialog box appears confirming
the number of units to be deleted. If you are deleting a Remote Console
Switch, the dialog box includes a Delete Associated Servers check box.
Click to enable/disable the check box as desired.
3 Click Yes to confirm the deletion. Additional message prompts may appear
depending on your configuration. Respond as appropriate. The Remote
Console Switch or server is deleted.
-or-
Click No to cancel.
To delete a server type, site, department, or folder:
1 Select the server type, site, department, or folder you wish to delete from
the Group Selector pane.
2 Select Edit - Delete.
-or-
Press the <Del> key on your keyboard. A dialog box appears confirming
the number of units that will be affected by this deletion.
3 Click Yes to confirm the deletion. Additional message prompts may appear
depending on your configuration. Respond as appropriate. The element is
deleted.
-or-
Click No to cancel.
To rename a unit, site, department, or folder:
1 Select the server type, site, department, or folder you wish to delete from
the Group Selector pane in the RCS software.
2 Select Edit - Rename. The Rename dialog box appears.
3 Type a name from 1 to 32 characters long. Names are not case sensitive and
can consist of any combination of characters entered from the keyboard.
Spaces are permitted in the middle but leading and trailing spaces are not
Basic Software Operation
43