Information Properties - Dell PowerEdge 180AS User Manual

Click the Properties task button.
-or-
Right-click the unit and select Properties. The Properties dialog box
appears.
3 Click the Network tab and type in the address of the Remote Console
Switch. This field can contain an IP dot notation or a domain name.
Duplicate addresses are not allowed and the field cannot be left blank. You
can enter up to 128 characters, and may use an IPv4 or an IPv6 address, or
dual-stack an IPv4 and IPv6 simultaneously.
4 Type the HTTP and HTTPS port numbers in the HTTP Port and HTTPS
Port fields, respectively, if you changed the port numbers for the Remote
Console Switch in the serial console. For more information on changing
the port numbers in the serial console, see "HTTP/HTTPS Options" on
page 37.
5 Click Apply to save the new settings.
-or-
Click OK to save the new settings and close the window.
-or-
Click Cancel to exit without saving the new settings.

Information Properties

The Information tab allows you to enter information about the switch or
server including a description, contact information and any comments you
might wish to add.
To change information properties:
1 In the software, click the Remote Console Switches or Server tab and then
select an individual unit in the Unit Selector list.
2 Select View - Properties from the Explorer menu.
-or-
Click the Properties task button.
-or-
30
Basic Software Operation