Dell PowerEdge 180AS User Manual page 24

add. Once a Remote Console Switch or Avocent switch is added, it appears in
the Unit list. You may either manually add or discover a Remote Console
Switch. You may add a unit with either an IPv4 or an IPv6 address.
To add a new Remote Console Switch with an assigned IP address:
1 Select File - New - Remote Console Switch from the Explorer menu.
-or-
Click the New Remote Console Switch task button. The New Remote
Console Switch Wizard appears.
2 Click Next to continue. The Product Type dialog box appears and prompts
you to select the Remote Console Switch vendor and product.
Figure 3-2. Product Type Dialog Box
3 Select a Vendor. For each vendor, the supported product names appear in
the Product list. Select a product.
If the Remote Console Switch model you wish to add is not available in
the Product list, select Other. Once this switch is discovered, it will be
available in the Product list the next time you add a Remote Console
Switch.
NOTE:
Each dialog box in the New Remote Console Switch Wizard indicates the
type of switch you have selected from the Product list.
18
Basic Software Operation