Rdp Properties - Dell PowerEdge 180AS User Manual

menu. The RCS software will automatically replace these variables when
the application runs.
9 Enable/disable the Launch in command window check box. When
enabled, the user-specified VNC application will be launched from within
an OS command window.
10 Click OK.

RDP Properties

When you indicate a user-specified RDP application, you may include its
command-line arguments. A selection of macros is available for placement in
the command-line; this may be useful for automatic replacement of variables
such as IP address, port number, user name and password. For RDP
commands that do not provide their own GUI, such as those for computers
running Windows, Linux, and UNIX
RDP application launch from within an OS command window.
To change RDP properties:
1 Select a server in the unit list.
2 Select View - Properties from the Remote Console Switch Explorer menu.
- or -
Click the Properties task button.
- or -
Right-click on the unit. Select Properties from the pop-up menu. The
Properties dialog box appears.
3 Click the RDP tab, as appropriate.
4 For servers only, in the IP Address field, enter an IP address in dot notation
or a 1-128 character domain name. Spaces are not allowed. Duplicate
addresses are allowed. You may use an IPv4 or an IPv6 address, or both an
IPv4 and IPv6 address, simultaneously.
5 In the Port field, enter a port number in the range 23-65535. If blank, port
23 is used.
6 Mark to enable or clear to disable the Use Default check box. When this
setting is enabled, the default global setting specified in Options will be
used and all other portions of the Application to Launch area are disabled.
®
operating systems, you may have the
Basic Software Operation
33