Setting The Agent Snmp Data Collection Interval; Event Selection Window - HP Integrity rx1620 Software Manual

8. Click OK to return to the recipient information window.
9. Select a user name and click Edit to edit user properties, or select a user name and click
Delete to remove a user.
10. Click Events to display the Event Selection window.
Figure 3-8 Event selection window
11. Use the severity and source filter fields to view selected events only. The event severity
levels, source, and message are not user-configurable.
12. Click the check box to enable an event or disable email notification for an event.
13. Click Use Default to load the current default event notification settings.
14. Click Set Default to set and save the current notification settings as the default values.
15. Click OK when you are done, returning to the Event Recipient Information window.
16. Click Finish to close the window.

Setting the agent SNMP data collection interval

Active agents poll server devices at preset intervals, collecting management SNMP data.
To set the agent SNMP data collection interval, complete the following steps:
1. Open the Windows Control Panel and double-click HP Management Agents.
The installed agents are listed in the window. All agents except clustering information are
activated at time of installation.
2. Click the SNMP Settings tab.
Installing the management agents 63