Update Firmware; Partition Disk - HP Integrity rx1620 Software Manual

7. EBSU displays the firmware update screen, listing each device, its installed firmware version,
and the firmware version on the Smart Setup media. Select the devices whose firmware you
want to update. To continue, select Next and press Enter.
Figure 2-3 Update firmware
NOTE: You might be able to use EBSU to flash the firmware of some devices. You cannot
flash the firmware if the installed version is the same or higher than the version on the Smart
Setup media. Also, you cannot use EBSU to flash the MP firmware. You must download the
latest MP firmware from the HP Integrity support site and flash it separately:
http://www.hp.com/support/itaniumservers/
8. To specify the disk partitions you want to create, select either ESP Only or ESP + HPSP +
MSR. HP recommends the default—ESP + HPSP + MSR—as a means to simplify the
maintenance of your server. Also, specify the option to install the Drive Explorer utility,
which enables you to browse a drive in EFI. Select Next and press Enter.
Figure 2-4 Partition disk
9. Specify the option to install offline diagnostic tools (from the HP Itanium Processor Family
offline diagnostics and utilities CD).
10. Also, specify the option to launch the Windows OS installer. Select Setup and press Enter.
Installing from a headless console 37