Installing The Management Tools; Installing System Management Homepage; Configure Smh After Support Pack Installation; Install Smh Separately - HP Integrity rx1620 Software Manual

3 Installing the Management Tools

This chapter describes the installation of tools and applications used to manage your Integrity
server.

Installing System Management Homepage

This section describes the installation of System Management Homepage (SMH) on Integrity
servers.

Configure SMH after Support Pack installation

When you install SMH using the Support Pack it, is configured using the default security settings.
Use the SMH online help for information on the security settings. To access the help:
1. Click Help on the System Management Homepage.
2. Click System Management Homepage Help.
3. On the left navigation bar, select Settings Tab > Security.

Install SMH separately

If SMH is not installed from the Support Pack, install it using the HP Smart Setup interface and
manually configure the security settings, using the following instructions:
1. Insert the HP Smart Setup media into the CD drive. The Smart Setup media autorun menu
loads and executes.
2. Click Agree to accept the license agreement and display the software and drivers window.
3. Go to the Software tab.
4. Select the server model from the list to display the software available.
5. Select System Management.
6. Click HP System Management Homepage for Windows. The Smart Setup download page
appears.
7. Click download >> to start the installation. The HP Package Setup screen appears.
Figure 3-1 HP System Management Homepage for Windows
8. Click Install.
9. Monitor the installation process as the files are copied to the server hard disk. The HP System
Management Homepage Setup wizard appears.
10. Click Next. The Operating System Groups dialog box appears.
Installing System Management Homepage 57