HP Integrity rx1620 Software Manual page 58

11. To add HP SMH group names:
a. In the Group Name field, enter a name for the operating system group.
b. Select an operating level to include: Administrator, Operator, or User.
12. Click Add. The group name is added. You can add a maximum of five entries for each group
level.
13. Click Next to continue. The User Access dialog box appears. Use it to configure HP SMH
for the following access types:
• Select Anonymous Access to enable anonymous access to unsecured pages.
• Select Local Access Anonymous or Local Access Administrator to set up HP SMH to
automatically grant local IP addresses at the selected access level.
CAUTION:
with access to the local console full access without prompting them for a user name or
password.
14. Click Next. The Trust Mode dialog box appears.
NOTE:
modes available: Trust by Certificate or Trust by Name. Trust by Certificate security is
described in step 15. Trust by Name security is described in step 16. You must perform one
of these steps only – not both of them. After completing step 15 or step 16, continue with
step 17.
IMPORTANT:
recommend using this option because it sets up HP SMH to accept certain requests from
any server and leaves your system vulnerable to security attacks.
15. To select the Trust by Certificate security mode from the Trust Mode dialog box, complete
the following steps:
a. Click Next. The Trusted Certificates dialog box appears. The Trusted Certificates dialog
box allows trusted certificate files to be added to the Trusted Certificate List.
b. Click Add File. The Add File dialog box appears. Select any certificates to be included
in the Trusted Certificate List. Click OK to select another file, or click Cancel to close
the dialog box. The Trusted Certificate List appears.
c. Click Next. The IP Binding dialog box appears.
d. Enter the name or IP address of the server whose certificate you want to import.
e. Click Get Cert. The certificate information appears.
f. Verify the certificate information. To add this certificate to the Trusted Certificate List,
click Accept, or click Cancel if you do not want to add it to the Trusted Certificate List.
The Trusted Certificate List appears.
g. Click Next. The IP Binding dialog box appears. Click Back to return to the Trust Mode
dialog box.
h. Go to step 17 and continue from there.
16. To select the Trust by Name security mode from the Trust Mode dialog box, complete the
following steps:
a. Select Trust By Name.
b. Click Next. The Trusted Server dialog box appears.
c. Enter the names of the servers you want to trust and click Add.
d. Click Next. The IP Binding dialog box appears.
58 Installing the Management Tools
Selecting local access with Administrator privileges provides any users
Next you must select the level of security you want to provide. There are two trust
There is another trust mode available called Trust All. HP does not