Dish Network Solo 311 User Manual page 42

Select the
4.
Create
5. The receiver displays a timer symbol in the
when you press the INFO button to get information about the program.
S U M
ETTING P A ANUAL
1. Press the MENU button.
2. Select the Timers option.
3. Select the Create option. The receiver displays the
Manual Event Timer
4. Select a Timer Type
5. Select a
Timer Frequency
6. Select a channel:
• Highlight a channel using the UP or DOWN
ARROW button. Then, press the SELECT button.
• Enter a channel number using the number buttons.
7. Select the Set Date/Time option. The receiver displays the
Time for Manual Timer
8. Use the NUMBER PAD buttons to enter the
selecting or
AM
).
PM
9. Use the NUMBER PAD buttons to enter the
10. Select the Create Timer
option to save the event timer.
E T
VENT IMER
menu.
option.
option.
menu.
) and the
PM End Time
option.
, and also
Program Guide
Create a
Set Date/
(this includes
Start Time
(this includes selecting
.
Date
Using Timers
Tip: You may start
any timer one
minute early. But if
you set back-to-
back event timers
and the second one
starts early, the first
one will end early.
An event timer
cannot start early
for a pay per view
program. If you try
to set a timer for
overlapping events,
you will get an error
message.
Tip: Use the
Program Guide or
your printed
television guide
to see when the
program(s) starts
and stops —
before you go to
the Set Date/TIme
for Manual Timer
menu.
or
AM
Page 37