Accessing The Twain Interface - Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Accessing the TWAIN Interface

Open the TWAIN interface from One Touch
If the One Touch configuration you're using to scan is set to Configure Before Scan, and the selected
option is TWAIN, the TWAIN interface opens right away without opening PaperPort first.
For example, the following figure shows the options you would have selected to set up PaperIn to open the
TWAIN interface.
Placing a document in the scanner's paper feed slot will bring up the TWAIN interface.
Open the TWAIN interface from an application:
Each TWAIN-compliant software application has its own specific steps to open the TWAIN interface, but
the basic process is the same for most of them.
1. Open a TWAIN-compliant scanning application.
2. Use the application's command that opens the TWAIN interface.
In PaperPort click on the tool bar Scan button then choose TWAIN: Xerox Travel Scanner 100 when
prompted. Select Display scanner dialog box and then click on the Scan button in the scanning pane.
Many Microsoft Office applications can access the TWAIN interface from the Insert menu, by choosing
Picture then From Scanner or Camera.
3. The TWAIN interface opens and you're ready to start scanning.
Xerox Travel Scanner 100 User's Guide
Scanning from the TWAIN Interface
59