Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual page 16

4. The calibration utility opens. Follow the instructions on screen for calibrating the scanner.
5. Place the calibration page in the scanner in the direction printed on the page. The black strip should be
face down.
6. The scanner will pull the calibration page through the scanner. The page will move back and forth as
the scanner calibrates for the difference between dark and light.
7. When calibration is complete, the scanner will back the page out of the paper feed. Remove the page
when prompted by the calibration utility.
When you remove the calibration page from the scanner the calibration utility will automatically close.
If the utility does not close, click on OK to close the window.
Xerox Travel Scanner 100 User's Guide
Installation
11