Roaming Info; Info (On The Network Connection) - Aastra PHONE 312 User Manual

Handset for calling via sip in a wlan
Hide thumbs Also See for PHONE 312:
Table of Contents

Advertisement

Tools for troubleshooting/info

Roaming info

If this option is active, the handset will bring up an alert window each time a connection to an AP is
established, lost or changed. The message contains the BSSID of the AP. It will disappear automati-
cally after a few seconds. The message appears when the option is active irrespective of the opera-
tional status of the device, e.g. even during a conversation. This function can be used to detect
errors and weaknesses in an existing installation.
E
Menu
Press
F
Select
System
F
Select
Network
F
Select
Tools
F
Select
Roaming info

Info (on the network connection)

You receive information about the status and properties of the network connection:
: Own IP address, or "-" if none is available. The latter can be the case if DHCP is activated
IP address
and no address has yet been assigned.
: IP address of the default gateway, "-" if none has been configured and/or has not been
Gateway
assigned by DHCP.
: Own MAC address.
MAC
: If there is a connection to the WLAN, the corresponding SSID is displayed here.
SSID
: MAC address of the AP that the device is currently associated with. "-" if there is no associa-
BSSID
tion, i.e. no connection to the WLAN.
: In the diagram the progression of the destination field strength of the currently active
RSSI history
AP over the last few minutes is displayed. The perpendicular axis shows the field strength in dBm,
the horizontal axis shows the time. On the right-hand side the current field strength is displayed,
older field strengths are further to the left.
The green area of the diagram marks field strengths, which are suitable for telephony. Those in the
red area will be subject to restrictions (interference, interruptions).
Using the
+/-
and approx. 5 minutes.
58
.
and confirm using
and confirm using
and confirm using
. You can switch this function on
softkey, the scale of the time axis can be changed between approx. 30 minutes
OK
.
OK
.
OK
.
or off
using
OK
.

Advertisement

Table of Contents
loading

Table of Contents