Logging On The Handset; Attaching/Removing The Belt Clip - Aastra PHONE 312 User Manual

Handset for calling via sip in a wlan

Hide thumbs Also See for PHONE 312:

Table of Contents

Installation

Logging on the handset

Some preparations and programming are necessary to be able to integrate your handset into an

existing wireless network (WLAN) and to register it on an access point (AP). You will find a detailed

description of the corresponding steps in the chapter "WLAN: Registering a handset" starting on

page 47.

You can save five so-called "profiles" on your handset. These profiles contain the accounts of five dif-

ferent WLAN configurations. When changing from one WLAN to another you are therefore able to

make calls within a very short period of time by selecting the corresponding profile.

For further information on the profiles see menu "System > Network > Profiles" on page 51.

Push the adapter clip over the reverse side of the handset

until the clip locks into place in the side openings. To remove

the belt clip, pull the clips apart slightly.

Table of Contents