Software Update/Licenses/Pin; Version; Update - Aastra PHONE 312 User Manual

Software update/licenses/PIN

Version

Under Version you can see the version numbers of the software (SW) and the hardware (HW) of the
device.
E
Menu
Press .
F
Select System
F
Select Software
F
Select Version

Update

Using this function, the handset software can update itself. In order to do this, the handset must be
connected to a WLAN from which the server is attainable. If possible, use the ftp process as this
allows quicker data transfer. If the update is aborted, or error messages are displayed the current
software remains unchanged. Attempt the process again. After the software update the handset will
be restarted in order to activate the new software. You can continue making calls during the update
process.
E
Press Menu .
F
Select System
F
Select Software
F
Select Update
F
Select one of the following menu items and confirm it using
Check now
Settings
and confirm using
and confirm using
and confirm using
and confirm using
and confirm using
and confirm using
Press OK . It is checked whether another device software is available
on the server. If available, this software is immediately loaded into the
device.
Press OK . Enter the administrator PIN ("22222" by default). Enter the
data of the server from which the update is to be completed into the
entry fields. Start the update using
The following entries are required:
: ftp, tftp, http (Select using
Protocol
Preset on delivery: ftp
OK .
OK .
OK .
OK .
OK .
OK .
OK .
OK .
).
61