Quick Instruction For Photo Download From A Cf Card - JOBO GIGA VU PRO EVOLUTION User Manual

3 Quick Instruction for
Photo Download from
a CF Card
When operating the first time with the GVPE
without AC power supply, make sure that the
battery is charged completely as described in
chapter 2.3, "First use".
1 Take off the rubber cover, turn it around
and attach it to the bottom of the unit.
2 Plug in the AC power supply.
3 Press the On/Off button for a few seconds.
4 Allow the unit to power-up.
5 Enter a memory card in the memory card
slot and wait a few seconds. The screen
will appear as shown in Fig. 3.1.
Fig. 3.1: Screen "Copy from CF card".
6 Press softkey 5, "Start" (the rightmost
one).
Now the GVPE copies all files from the
memory card to its hard disk.
7 When done, you see how many files have
been copied and how much disk space they
occupy, how much disk space is used in
general and how much capacity is still left
on the device.
Fig. 3.2: Screen "Copy form CF card completed".
8 To view the photos, press softkey 1,
"Photos" (the leftmost one).
Select one of the following modes to view
the photos:
Fig. 3.3: Screen "View mode for photo albums".
Full view
9 To view the photos press the joystick.
10 Use the joystick left / right to browse the
pictures.
11 Use the joystick up / down to view or hide
the softkey text.
Thumbnail view
9 To view the thumbnails move the joystick
up / down until "View Thumbs" is
highlighted.
GB
9