JOBO GIGA VU PRO EVOLUTION User Manual page 11

Fig. 4.1: "Home" screen.
To change the display press the "Settings"
button.
A screen as depicted in fig. 4.2 will pop up.
Fig. 4.2: Screen "Home Settings".
Move the joystick up / down to select an item
and move the joystick left / right to select
another option.
To save the new settings, press softkey 5,
"Save".
To leave the menu without saving, press softkey
1, "Cancel".
1. Battery: Choose between "%" oder "Time
Left".
The battery status indication expressed in
% is rather accurate. The indication of the
time left is an estimation, because the power
consumption of the GVPE depends on the kind
of activity. For example, playing music files will
consume much less energy than playing video
files via a TV or flat screen monitor. The time
left is obtained by performing a calculation
taking into account the battery status and
the average consumption. It is provided for
easiness but will be less accurate than the %
readings.
2. Disk: Choose between "%" or "GB Left".
Back
This button brings you one step higher in the
menu hierarchy. In most of the cases, this is
a direct step back. As some operations need
certain commands, in these cases you will be
routed to the needed interface screen.
Settings
This button has a function whenever the orange
LED inside the button is on. The LED goes
on when the menu displayed provides some
context sensitive settings that can be changed.
Mostly these are options you can adjust to
tailor the user interface to your specific needs.
In any case use the joystick up / down to
select the item you want to change. Use the
joystick left / right to view and select a new
setting. Furthermore, two functions are always
available:
- To save the new settings, press softkey 5,
"Save".
- To leave the menu without saving new
settings, press softkey 1, "Cancel".
GB
11