JOBO GIGA VU PRO EVOLUTION User Manual page 21

In order to maximize speed, the GVPE will
determine the memory card's speed grade
before starting the copy process. Some media
adapters designed for using SD or MS memory
cards in CompactFlash slots may disturb this
mechanism and as a consequence copying
may be slowed down. In case you experience
problems, use the "Show Previews" copy mode.
- Show Previews:
When you like to see the previews during the
copying process, choose this option.
It is strongly advised not to switch off the unit
during copy actions. Doing so may corrupt the
data structure on GVPE's hard disk drive. If the
unit accidentally powers down during copying,
carefully check if all files were copied and then
run the disk repair utility (see chapter 6.4,
section "Check Hard Disk for Errors").
4. Action when done:
This function defines what GVPE will do after
the copy action is complete. Use the joystick
left / right to select one of the four options.
- Do Nothing:
The GVPE will stay switched on and wait for
user interaction.
- Switch off:
The GVPE will switch off when it has performed
the actions defined in the "Copy Action"
setting. This can be very convenient because
you can leave the unit unattended and go on
shooting pictures, for example. On your return
you can power on the unit and check your data.
- Beep:
The GVPE will produce a beep at the end of the
copy process.
- Beep + Switch off:
The GVPE will produce a beep at the end of the
copy process and then switch off.
5. Generate cached views:
After copying, the GVPE can generate so called
"cached views". They can be helpful for the
selection of pictures, because the pictures
will appear on the screen without delay
immediately after they have been selected. The
caching process may take some time, especially
when copying albums that contain many
pictures. Use the joystick left / right to select
one of the two options.
- No
As default this function is switched off. No
cached views are generated.
- Yes
Cached views are generated from every file that
enables this action (e.g. JPEG, TIFF, RAW).
Other file formats are ignored. As generating
the cached views takes some time, it is advised
to connect the GVPE to the mains using the AC
power supply.
6. Softkey 3, "Select":
The GVPE displays how many files are selected
for copying. In case you will not copy all files,
press this softkey to select pictures.
You may tailor the "Select" process to your
needs and copy files more selectively if wanted.
See chapter 4.2, "How to select content" for
possible settings and options.
After the copy process is completed, the GVPE
shows the status on the screen. This will be
shown only once so please check this before
you press any button and proceed using the
unit.
GB
21