Related Manuals for JOBO Photo Display PDJ120
Summary of Contents for JOBO Photo Display PDJ120
-
Page 1: Photo Display
Photo Display Instruction Manual PDJ120 / PDJ855 / PDJ152 / PDJ155 ��������������������������������������... -
Page 2: Main Features
1.3. Cleaning the LCD Screen Treat the screen gently. The screen on the JOBO Photo Display is made of glass and can be scratched or broken. If fingerprints or dust make the LCD screen dirty, we recommend using a soft, non-abrasive cloth such as the camera lens cloth to clean the LCD screen. If you use the LCD Cleaning Kit sold on the market, do not apply the cleaning liquid directly to the LCD screen. -
Page 3: Getting Started
��� The JOBO Photo Display is compatible with the most popular memory cards and USB Disk: [For Details please refer to technical details in section 3] Insert the memory card with the front label facing away from you. Do not force the memory ��... -
Page 4: Viewing Picture
�� ��� ��� 2.2. Viewing Picture �� �� You can use either the remote control or the on-board buttons to control the Photo Display. Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure the remote control has a battery installed. -
Page 5: Installing And Replacing The Remote Control Battery
2.3. Installing and Replacing the Remote Control Battery Place the Remote Control with the control buttons facing downward. While pressing down on the ridged area of the battery cover pull the tray out. Place a “CR2025” lithium battery on the tray with the positive “+” end facing toward you. Close the tray. -
Page 6: Warranty And Service
JOBO AG and its suppliers do not assume any liability for data losses occurring during operation of the device or consequential damage resulting from this. Under no circumstances will JOBO AG assume liability for any direct, concrete or special damage or consequential damage like for example damage to or loss of property or devices, loss of profits or... - Page 7 If you want to make any claims under the warranty you are asked to contact the Technical Service of JOBO AG. You will be expected to quote the serial number of the JOBO product and may also have to submit proof of purchase to show that the warranty period has not yet elapsed.