Wifi & Ftp Settings - JOBO GIGA VU PRO EVOLUTION User Manual

videos on a TV.
Use the joystick left / right to select the
TV standard.
2. LCD Brightness: Adjust the brightness of
the screen.
Use the joystick left / right to select the
preferred brightness. The brighter the
screen, the more energy is needed.
3. Decode Quality: Adjust the quality for
decoding.
A lower quality means faster decoding,
a higher quality returns a slightly better
image rendition at the cost of some extra
time.
Use the joystick left / right to select your
preferred decode quality.
4. Color Profile: Select the preferred color
profile for watching photos.
Use the joystick left / right to select your
preferred setting.
5.4 WiFi & FTP Settings
The GVPE can be incorporated in your
wireless network by inserting an optional
WiFi CompactFlash card (see chapter 12,
"Available Accessories"). If you work with the
recommended WiFi CompactFlash card there will
be no problem, but the GVPE is not guaranteed
to work with all brands of WiFi CompactFlash
cards. Therefore check the JOBO website (www.
jobo.com) for approved types first or try the type
of your choice before you buy. Trying out a WiFi
CompactFlash card will not damage the GVPE.
In the "WiFi & FTP Settings" menu as shown
in fig. 5.5 the basic settings for the wireless
data transfer are adjusted. Use the joystick up /
down to select one of the items.
To save the new settings, press softkey 5,
"Save".
To leave the menu without saving new settings,
press softkey 1, "Cancel".
Fig. 5.5: Screen "Connect Menu – WiFi & FTP
Settings".
1. SSID: Enter your network name here.
This network name will be given to you by
the administrator of the current network.
To enter the name, move the joystick to
the right. Then a keyboard will appear and
you can enter the letters. See chapter 4.3
for keyboard description.
2. Mode: Depending on the type of network
select "adhoc" or "infrastructure".
Use the joystick left / right to select the
network type.
Adhoc: Use this setting if you connect the
GVPE directly to a PC or a local network.
Infrastructure: Use this mode if you look
for an access point (Hot Spot).
3. Channel: Select the channel according to
the WiFi network router. Please consult the
router's user manual for this.
Use the joystick left / right to select the
correct channel.
4. WEP: Select the type of encryption
according to the network router. Please
consult the router's user manual for this.
Use the joystick left / right to select the
mode in which the key can be decrypted.
5. Key: Enter the key for the WEP here. Please
consult the router's user manual for this.
To enter the key, move the joystick to the
right. Then a keyboard will appear. See
GB
17