How To Use The Keyboard - JOBO GIGA VU PRO EVOLUTION User Manual

chosen files were selected prior to the action,
they will be de-selected afterwards.
If the block contains a mix of selected and non
selected files prior to the action, the selection
will be inverted afterwards.
To select files with the From-To method,
follow the steps below:
- Press softkey 3, "Select".
- Press "None" to deselect all files.
- Press "More" to enter the 3rd layer.
- Move the joystick to the first file of the block
you want to select.
- Press the joystick.
- Press softkey 2, "To".
- Use the joystick to highlight the last file of
the block. In order to move to the last file of a
selection you can use also the softkey "More",
and the 2nd layer softkeys "Prev", "Next" and
"GoTo".
- When the last file of the block is highlighted,
press softkey 2, "To".
- To finalize the operation, press softkey 5,
"Done".
Default settings for selections
By factory default, the GVPE will select all data
files when entering the selection process. This
default starting condition can be modified
by pressing the "Settings" button after the
selection screen appeared.
Fig. 4.5: Screen "Selection Settings"
For each type of file (photos, music, movies and
other files) the starting conditions can be set
to "Select All", "Select None" or to "Recall last
selection".
For photo view you can choose between
thumbnail or file list view as default method for
the selections.
4.4

How to Use the Keyboard

Whenever you need to enter text (e.g. when
renaming an album or editing keywords), a
keyboard screen will be displayed.
Fig. 4.6: Screen with keyboard.
At the top of the screen there is a text entry
field. Left to it there is an indication of the
directions in which the joystick can be moved.
Use the joystick to select a character from the
displayed list. The softkeys 1 to 3 allow you
to switch between lower case, upper case and
numeric characters. Press the joystick to add
the selected character.
A text cursor will indicate the position where the
character will be added. If you want to change
the text cursor's position, move the joystick
upwards until the position indicator shows that
you are in the text entry field. Then use the
joystick left-right to change the cursor position.
GB
13