Queuing And Scheduling - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual
Ethernet blade switch for c-class bladesystem
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Interface manual (209 pages) ,
- Command reference manual (175 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
c.
Select a Class of Service queue (CoS).
d.
Enter a value for the weight of the Class of Service queue.
e.
Click Submit.
f.
Apply, verify, and save the configuration.
Queuing and scheduling
The GbE2c has two output Class of Service queues (COSq) per port (0-1), into which each packet is placed. Each
packet's 802.1p priority determines its COSq, except when an ACL action sets the COSq of the packet.
You can configure the following attributes for COS queues:
Map 802.1p priority value to a COS queue.
Define the scheduling weight of each COS queue.
Use the 802.1p menu (/cfg/qos/8021p) to configure Class of Service queues.
Quality of Service 86
Advertisement
Table of Contents
Troubleshooting
