HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual page 99

3. View dynamic IGMP information.
>> /info/l3/igmp
>> IGMP Multicast# dump
>> Switch-A - IGMP Multicast# dump
-----------
>> IGMP Multicast# mrouter
>> IGMP Multicast Router# dump
----------
These commands display information about IGMP Groups and Mrouters learned through IGMP Snooping.
Configuring IGMP Filtering (CLI example)
1. Enable IGMP Filtering on the switch.
>> /cfg/l3/igmp/igmpflt
>> IGMP Filter# ena
Current status: disabled
New status: enabled
2. Define an IGMP Filter.
>> //cfg/l3/igmp/igmpflt
>>IGMP Filter# filter 1
>>IGMP Filter 1 Definition# range 224.0.1.0
Current multicast address2:
Enter new multicast address2: 226.0.0.0
Current multicast address1:
New pending multicast address1: 224.0.1.0
Current multicast address2:
New pending multicast address2: 226.0.0.0
>>IGMP Filter 1 Definition# action deny
>>IGMP Filter 1 Definition# ena
Group VLAN
------
238.1.0.0 1
238.1.0.1 1
VLAN Port
-----------
1 23
(Select IGMP Information menu)
(Show IGMP Group information)
Version Port
--------- -------------
V2 20
V2 21
(Select MRouter Information menu)
(Show IGMP Group information)
Version
----------
V2
(Select IGMP Filtering menu)
(Enable IGMP Filtering)
(Select IGMP Filtering menu)
(Select Filter 1 Definition menu)
(Enter first IP
(Enter second IP
(Deny multicast traffic)
(Enable the filter)
L)earnt/(S)tatic
-----------------
S
address of the range)
address of the range)
IGMP Snooping 99