HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual page 100

3. Assign the IGMP Filter to a port.
>> //cfg/l3/igmp/igmpflt
>>IGMP Filter# port 24
>>IGMP Port 24# filt ena
Current port 24 filtering: disabled
New port 24 filtering: enabled
>>IGMP Port 24# add 1
>>IGMP Port 24# apply
Configuring a Static Mrouter (CLI example)
1. Configure a port to which the static Mrouter is connected, and enter the appropriate VLAN.
>> /cfg/l3/igmp/mrouter
>> Static Multicast Router# add 20
Enter VLAN number: (1-4094) 1
Enter the version number of mrouter [1|2]: 2 (Enter the IGMP
2. Apply, verify, and save the configuration.
>> Static Multicast Router# apply
>> Static Multicast Router# cur
>> Static Multicast Router# save
Configuring IGMP Snooping (BBI example)
1. Configure port and VLAN membership on the switch, as described in the "Configuring ports and VLANs (BBI
example)" section in the "VLANs" chapter.
2. Configure IGMP Snooping.
a. Click the Configure context button.
b. Open the IGMP folder, and select IGMP Snooping (click the underlined text, not the folder).
(Select IGMP Filtering menu)
(Select port 24)
(Enable IGMP Filtering on the port)
(Add IGMP Filter 1 to the port)
(Make your changes active
(Select IGMP Mrouter menu)
(Add port 20 as Static
Mrouter port)
(Enter the VLAN number)
version number)
(Apply the configuration)
(View the configuration)
(Save the configuration)
IGMP Snooping 100