Configuring Port Mirroring (Cli Example) - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual

Configuring Port Mirroring (CLI example)

To configure Port Mirroring for the example shown in the preceding figure:
1. Specify the monitoring port.
>> # /cfg/pmirr/monport 20
2. Select the ports that you want to mirror.
>> Port 20 # add 23
>> Enter port mirror direction [in, out, or both]: in
(Monitor ingress traffic on port 23)
>> Port 20 # add 11
>> Enter port mirror direction [in, out, or both]: out
(Monitor egress traffic on port 1)
3. Enable Port Mirroring.
>> # /cfg/pmirr/mirr ena
4. Apply and save the configuration.
>> PortMirroring# apply
>> PortMirroring# save
5. View the current configuration.
>> PortMirroring# cur
Port mirroring is enabled
Monitoring Ports Mirrored Ports
1
2
3
4
5
17
18
20(23, in) (11, out)
21
none
none
none
none
none
:
:
none
none
none
:
(Select port 20 for monitoring)
(Select port 23 to mirror)
(Select port 11 to mirror)
(Enable port mirroring)
(Apply the configuration)
(Save the configuration)
(Display the current settings)
Troubleshooting tools 160