HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual page 150

5. Enable tracking on ports. Set the priority of Virtual Router 1 to 101, so that it becomes the Master.
/cfg/l3/vrrp/vr 1
>> VRRP Virtual Router 1# track/ports/ena
>> VRRP Virtual Router 1 Priority Tracking# ..
>> VRRP Virtual Router 1# prio 101
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2
>> VRRP Virtual Router 1# track/ports/ena
6. Turn off Spanning Tree Protocol globally.
/cfg/l2/stg 1/off
>> Spanning Tree Group 1# apply
>> Spanning Tree Group 1# save
Task 2: Configure Switch B
1. Configure ports.
/cfg/l2/vlan 10
>> VLAN 10# ena
>> VLAN 10# add 20
>> VLAN 10# ..
>> Layer 2# vlan 20
>> VLAN 20# ena
>> VLAN 20# add 21
2. Configure client and server interfaces.
/cfg/l3/if 1
>> IP Interface 1# addr 192.168.1.101
>> IP Interface 1# vlan 10
>> IP Interface 1# ena
>> IP Interface 1# ..
>> Layer 3# if 2
>> IP Interface 2# addr 192.168.2.100
>> IP Interface 1# vlan 20
>> IP Interface 2# ena
>> IP Interface 2# ..
>> Layer 3# if 3
>> IP Interface 3# addr 10.0.1.101
>> IP Interface 3# mask 255.255.255.0
>> IP Interface 3# ena
>> IP Interface 2# ..
>> Layer 3# if 4
>> IP Interface 4# addr 10.0.2.100
>> IP Interface 4# mask 255.255.255.0
>> IP Interface 4# ena
3. Configure the default gateways. Each default gateway points to one of the Layer 2
routers.
/cfg/l3/gw 1
>> Default gateway 1# addr 192.168.2.1
>> Default gateway 1# ena
>> Default gateway 1# ..
>> Layer 3# gw 2
>> Default gateway 1# addr 192.168.1.1
>> Default gateway 1# ena
4. Turn on VRRP and configure two Virtual Interface Routers.
/cfg/l3/vrrp/on
>> Virtual Router Redundancy Protocol# vr 1(Select virtual router 1)
>> VRRP Virtual Router 1# vrid 1
>> VRRP Virtual Router 1# if 1
>> VRRP Virtual Router 1# addr 192.168.1.200(Define IP address)
>> VRRP Virtual Router 1# ena
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2 (Select virtual router 2)
>> VRRP Virtual Router 2# vrid 2
>> VRRP Virtual Router 2# if 2
>> VRRP Virtual Router 2# addr 192.168.2.200(Define IP address)
>> VRRP Virtual Router 2# ena
5. Enable tracking on ports. Set the priority of Virtual Router 2 to 101, so that it becomes the Master.
/cfg/l3/vrrp/vr 1
>> VRRP Virtual Router 1# track/ports/ena
>> VRRP Virtual Router 1 Priority Tracking# ..
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2 (Select VRRP virtual router 2)
(Select VRRP virtual router 1)
(Set tracking on ports)
(Set the VRRP priority)
(Select VRRP virtual router 2)
(Set tracking on ports)
(Turn off STG)
(Select VLAN 10)
(Enable VLAN 10)
(Add port 20 to VLAN 10)
(Select VLAN 20)
(Enable VLAN 20)
(Add port 21 to VLAN 20)
(Select interface 1)
(Define IP address for interface 1)
(Assign VLAN 10 to interface 1)
(Enable interface 1)
(Select interface 2)
(Define IP address for interface 2)
(Assign VLAN 20 to interface 2)
(Enable interface 2)
(Select interface 3)
(Define IP address for interface 3)
(Define subnet mask for interface 3)
(Enable interface 3)
(Select interface 4)
(Define IP address for interface 4)
(Define subnet mask for interface 4)
(Enable interface 4)
(Select default gateway 1)
(Point gateway to the first L2 router)
(Enable the default gateway)
(Select default gateway 2)
(Point gateway to the second router)
(Enable the default gateway)
(Turn VRRP on)
(Set VRID to 1)
(Set interface 1)
(Enable virtual router 1)
(Enable virtual router 1)
(Set VRID to 2)
(Set interface 2)
(Enable virtual router 2)
(Select VRRP virtual router 1)
(Set tracking on ports)
High availability 150