HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual page 50

2. Configure the VLANs and their member ports. Since all ports are by default configured for VLAN 1, configure
only those ports that belong to VLAN 2. Crosslink ports 17 and 18 must belong to VLANs 1 and 2.
>> /cfg/l2/vlan 2
>> VLAN 2# add 1
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 1
>> VLAN 2# add 20
Current ports for VLAN 2: 1
Pending new ports for VLAN 2: 20
>> VLAN 2# add 23
Port 23 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 2: 1, 20
Pending new ports for VLAN 2: 23
>> /cfg/l2/vlan 3
>> VLAN 3# add 17
Current ports for VLAN 3: empty
Pending new ports for VLAN 3: 17
>> VLAN 3# add 18
Current ports for VLAN 3: 17
Pending new ports for VLAN 3: 18
>> VLAN 3# add 20
Current ports for VLAN 3: 17, 18
Pending new ports for VLAN 3: 20
>> apply
>> save
Configuring ports and VLANs on Switch 2 (CLI example)
To configure ports and VLANs on Switch 2, do the following:
1. On Switch 2, enable VLAN tagging on the necessary ports. Port 4 (connection to server 2) remains untagged,
so it is not configured below.
Main# /cfg/port 2
>> Port 2# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 2 changed to tagged.
Main# /cfg/port 17
>> Port 17# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 17 changed to tagged.
Main# /cfg/port 18
>> Port 18# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 18 changed to tagged.
Main# /cfg/port 20
>> Port 20# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 20 changed to tagged.
>> Port 20# apply
(Select port 2: connection to server 1)
enabled
(Select crosslink link port 17)
enabled
(Select crosslink link port 18)
enabled
enabled
(Apply the port configurations)
(Add port 1 to VLAN 2)
(Add port 20 to VLAN 2)
(Add port 23 to VLAN 2)
(Add port 17 to VLAN 3)
(Add port 18 to VLAN 3)
(Add port 20 to VLAN 3)
(Apply the port configurations)
(Save the port configurations)
(Enable tagging)
(Enable tagging)
(Select uplink port 20)
(Enable tagging)
VLANs 50