Changing/Deleting Group Dial Information - Konica Minolta bizhub C25 Facsimile Manual

Changing/Deleting Group Dial Information

The registered group dial information can be changed.
1
Press the + or , key to select [UTILITY], and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [GROUP DIAL], and then press the Select
key.
The [GROUP DIAL] screen appears.
4
Use the keypad to type in the number of the group dial destination to be
edited/deleted, and then press the Select key.
d
5
Press the + or , key to select [EDIT] or [DELETE], and then press the
Select key.
–
If [EDIT] was selected, the name is displayed. Continue with step 6.
–
If [DELETE] was selected, the settings programmed for the group dial
number are deleted. This completes the procedure when it is deleted.
6
If you want to change the name of the group, enter the new name, and
then press the Select key.
d
7
Add/delete destinations.
–
To add a destination, check that [ADD] is selected, and then press the
Select key. Type in the speed dial number, press the Select key, and
then press the Select key again.
–
To delete a destination, press the + or , key to select [CHECK/EDIT],
and then press the Select key.
Press the + or , key to select the destination to be deleted, and then
press the Stop/Reset key.
Check that [YES] is selected, and then press the Select key.
The destination is deleted from the group dial list.
8
Press the + or , key to select [FINISH], and then press the Select key.
The edited information is registered with the group dial number.
6-10
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 9-4.
For details on editing text, refer to "Entering Text" on page 9-4.
Group Dialing